Pay in installments of $5.61 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
earthquaker plumes pedal EarthQuaker Devices Plumes Overdrive PedalALL ANALOG 3 UNIQUE VOICES SIMILAR TO AN IBANEZ TUBESCREAMER BUT WITH MORE MADE IN AKRON, OHIO FREE SHIPPING IN THE USA EXPERT TECHNICAL SUPPORT IN STOCK MEANS IN STOCK DESCRIPTION Plumes is a unique, all analog approach to a classic tube like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low
ALL ANALOG
3 UNIQUE VOICES
SIMILAR TO AN IBANEZ TUBESCREAMER BUT WITH MORE...
MADE IN AKRON, OHIO
DESCRIPTION
Plumes® is a unique, all-analog approach to a classic tube-like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three-dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain.
EarthQuaker Devices has added three different clipping options for your consideration:
Mode 1 is symmetrical clipping utilizing a pair of light emitting diodes. This is the crunchiest setting the Plumes has to offer. When played through a clean amp, it’ll deliver a reasonable facsimile of that classic black and gold British valve amp tone. If you already set your amp dirty, using this mode will make it filthy.
Mode 2 is clean boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This is perfect for pushing your clean tone out in front or driving the preamp of an already overdriven amp into tasteful breakup territory.
Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity; the tone some people describe as “transparent”. It’s almost as if your clean tone is blended in with a slightly less clean tone, ya know? Using this mode gives a warmer low-end response and lower output. It’s less hard on your amp and your ears. It’s a classic pleasant tone the whole band can enjoy.
**Sorry international bassists, but US Dealers are not authorized to ship EarthQuaker Devices pedals outside of the US. Please contact us if you are having trouble finding EarthQuaker Devices products in your home country.
CONTROLS
Level: This controls the output volume.
Gain: This controls the amount of drive.
Tone: More bass to the left, more middles in the middle and more treble to the right.
Clipping Modes (3-Way Toggle):
- Symmetrical LED clipping - More Crunch and Compression.
- No clipping - Wide open OpAmp drive for clean boost.
- Asymmetrical silicon diode clipping - More transparency with a loose feel.
TECH & SPECS
Current Draw: 25 mA
Input Impedance: 10 MΩ
Output Impedance: 100 Ω
Flexi-Switch® Technology
This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.
- For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
- For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.
Since the switching is relay based, it requires power to pass signal.
Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EarthQuaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Size:
4.75" [121mm] Long
2.50" [64mm] Wide
2.25" [57mm] High (with Knobs)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy